6 Head Liquid Bottle Filling Machine

6 head liquid bottle filling machine

1. Double-row piston piston cylinder structure, stable and reliable structure. The servo motor drives the double screw transmission mechanism and adopts PLC program control to ensure the high precision of the piston movement stroke.

2. When filling a new specification dose, the dose adjustment can be done at one time on the touch screen, and the fine adjustment of the dose of each filling head is also carried out directly on the touch screen.

3. The submerged filling mode in which the cylinder drives the filling head to operate, with the adjustable variable speed filling function, can reduce the foam production of easily foamable materials during filling and prevent bottle mouth pollution caused by material overflow.

4. Optimized in and out bottle control mode, two modes of normal/fast can be selected. In the fast bottle in and out mode, the bottle is fed in at the same time as the bottle is discharged, and there is no delay between the in and out of the bottle, which effectively improves the production efficiency.

5. Piston seals using the latest tetrafluorocarbon carburizing technology improve the wear resistance and applicability of piston seals to various materials, and effectively solve the problem of piston filling machines for emulsifiable oils, water-soluble suspensions, and high viscosity. The problem is that thick materials cannot be used universally.

6. In addition to liquid level detection for normal working liquid level control, high liquid level detection and sound and light alarm devices are added to prevent abnormal liquid levels.

7. An independently controlled residual drip collection tank is installed under the filling head to ensure that the liquid of the filling head does not drip out of the bottle mouth.

8. The feed pipe is equipped with a detachable filter screen to prevent the filling valve from affecting the filling accuracy and the service life of the valve due to impurities.

9. Outsourcing stainless steel and tempered glass door cover to seal the machine body, reducing environmental pollution caused by waste gas overflow during the filling process.

Technical parameter of 6 head liquid bottle filling machine

1. Production speed:≥5000 bottles/hour (80ml water level medium)

2. Filling capacity:50-1000 (ml)

3. Suitable bottle type:round bottle  diameter 35-100 (mm), bottle height 75-270 (mm)4. Measurement error:±1%

5. Power supply:~220 (V) 50 (Hz)

6. Air source pressure:0.5-0.7 (MPA)
7. Power:2.8 (KW)

8. Air consumption:200 liters per minute

9. Machine dimensions:2550×1350×2300 (mm) (length×width×height)

Configuration of 6 head liquid bottle filling machine

PLC programmable controller:Delta  

Servo system: Delta

Touch screen: Weilun

Low-voltage electrical appliances: Schneider

Switch button: Schneider

Photoelectric system: Autonics

Solenoid valve: Airtac

Hot Tags: 6 head liquid bottle filling machine, China, suppliers, manufacturers, factory, price