What is the principle of the aluminum foil sealing machine?
The aluminum foil sealing machine uses the principle of electromagnetic induction to instantly generate high heat on the aluminum foil on the bottle mouth, and then fuse it on the bottle mouth to achieve the function of sealing. The sealing speed is fast, suitable for mass production; the all-stainless steel moulded shell is beautiful and generous; the use is convenient, and the sealing quality is good. continuously working. It is an ideal sealing equipment for the industries of medicine, pesticide, food, cosmetics, lubricants and so on.
Technical performance of the aluminum foil sealing machine
The aluminum foil sealing machine uses the principle of electromagnetic induction to achieve the adhesion between the sealed aluminum foil and the bottle mouth, and is an ideal aluminum foil sealing equipment. The structure of the aluminum foil sealing machine is simple. It is an ideal auxiliary production line equipment in China.
Technical parameter of the aluminum foil sealing machine
Temperature: 0-200°
Sealing speed: 3.3m/min
Dimensions: 290×94×160mm
Structure of the aluminum foil sealing machine
When the package containing the items is placed on the conveyor belt, the sealing part of the bag is automatically sent between the two sealing belts in operation and brought into the heating zone. The heat of the heating block is transferred to the sealing part of the bag through the sealing belt. The film is heated and melted, and then passed through the cooling zone to make the surface temperature of the film drop appropriately, and then rolled through the knurling wheel (or printing wheel), so that the upper and lower plastic films of the sealing part are glued and pressed into a net pattern (or printed logo) ), and then the sealed packaging bag is sent out of the machine by the guiding rubber belt and the conveyor belt to complete the sealing operation.
Principles and characteristics of the aluminum foil sealing machine
1. This sealing machine is mainly used for heating and sealing polyolefin (such as polyethylene, polypropylene, etc.) as the inner layer of composite film materials and plastic bag sealing.
2. Composite film sealing includes cellophane sealing, aluminum foil sealing, aluminum spray coating sealing, polyester sealing, nylon sealing, polyethylene sealing, polypropylene sealing and other materials sealing.
3. The thickness of the film and the width of the sealing can be applied within a certain range, and a good and uniform linear sealing can be achieved.
4. No matter the big bag, small bag, long bag or short bag can be continuously sealed in a straight line, and satisfactory results can be obtained.
5. The machine is exquisitely designed and easy to operate.
6. The packaging speed of this machine is faster and the efficiency is high.
Instructions of the aluminum foil sealing machine
1. Choose a flat table, put the machine steady, and pull the chassis feet apart to make the machine panel easy to observe.
2. Insert the plug on the handheld sensor head into the socket on the panel and tighten it. Pay attention to the positioning gap
3. Insert one end of the power cord into the socket on the rear panel of the chassis and the other end into the power supply socket. Please use a single-phase three-wire power supply.
4. Turn on the "POWER SW." on the rear panel of the chassis, press the "SWITCHING" button on the panel, and wait for the "WARM UP" green indicator light to turn on, and the machine can work.
5. Press and hold the "SETTING BUTTON" button and set it to an appropriate value, usually between 0.5-2.0 seconds.
6. Put the induction head on the container lid and press the start button on the handle. At this time, the "HEATING" red indicator light is on, indicating that it is heating, and the induction head should not be removed, and the "HEATING" red indicator light After it is off, remove the sensor head and wait for the "WARM UP" green indicator light to turn on or the buzzer in the machine to make a short "beep" prompt, and then you can proceed to the next container sealing operation.
Precautions of the aluminum foil sealing machine
1. This machine is not suitable for metal containers and metal caps, let alone press the start button on a metal table, otherwise the machine will be damaged.
2. Before turning on the power, the induction aviation plug must be inserted and the screws must be tightened.
3. This machine uses a single-phase three-wire power cord. For the safety of the operator, a single-phase three-wire power socket must be used. The ground of the workplace must be dry to maintain insulation.
4. This machine is equipped with an automatic protection function for overheating. When the temperature inside the machine is overheated, the buzzer inside the machine will beep for a long time and the yellow indicator light of "Abnormal Protection (PRO. MD.)" shall be on. At this time, the main power switch should be turned off and standby After the internal cooling buzzer stops, continue to work.
5. During the work process, you should always touch the surface of the induction head to check whether it is overheated. If you find that your hand is hot, stop heating and wait for it to cool down before working (cooling does not need to turn off the power). When the "WARM UP" green indicator light is off, Do not press the start button to avoid false triggering. After the machine is finished, please turn off the power switch on the panel.
6. This machine is equipped with a 5A fuse, which cannot be replaced by a fuse greater than 5A.
7. There is high voltage inside the machine, and the bottom plate is live. It is strictly forbidden to repair it privately to avoid personal electric shock.
8. If you find any exposed wires before use, you should stop using the machine and wait for repairs before using it.
9. This equipment should not be hit, pressed, or damp during transportation, storage and use.
10. When the product is unpacked for inspection and acceptance, if it is found that the parts of the product do not match the packing list, you should contact the company in time under normal transportation and the packaging is intact.
11. According to the instruction manual, the use and operation should be clearly understood in advance. If a product manufacturing quality problem is found, it should be explained to the company within the specified period. The equipment is guaranteed for half a year and is responsible for maintenance.
Note: The machine is equipped with current limiting protection. When the area of the sealing aluminum foil is too large or too close to the induction coil, the output will be automatically shut off, the buzzer inside the machine will beep, and the panel "abnormal protection (PRO. MD.)" The yellow indicator light is on until it recovers.
